Introduction | Ceiling Designs | Contact
  DETAILS
 
  3D CABLEGRID SECTION WITH LIGHT TRACK AND TWO DIMENSIONAL CABLEGRID EXTENSIONS
 
  APPLICATION DATA
 

For application data, material data and module sizes, please refer to your CableGrid Fact Sheet.

 

  SUGGESTED SPECIFICATIONS

Download Printable PDF File. 769k

View Ceiling Design Sheet

Furnish and install 3D CableGrid Ceiling System (#CG-24, #CG-30, #CG-36, #CG-48, and #CG-60) manufactured by Ceiling Designs Inc., and represented by (name, city and phone number of CDI sales representative) in all locations shown where indicated on the plans.

Finishes: Tubes and Hubs shall be in Standard White. Hub hardware shall be in Standard (Cadmium, Natural Brass). Custom Finishes: Custom finishes are available upon request.

Hanging System: Each Hub of the top layer shall be supported from the structure above by means of (#12 Pre-straightened Steel Hanger Wire secured to #CG-BL Loop using three tight wrappings) or (#CG-C16 Stainless Steel Cable attached securely top and bottom using #CG-SW Swedges (please refer to your CableGrid Fact Sheet for recommended tools).

All hangers shall drop plumb. Where plumb hangers are not possible, please refer to the manufacturer's Installation Instructions for directions.
Introduction | Ceiling Designs | Contact

CEILING DESIGNS, INC. 902 E Commonwealth Ave
Fullerton, California 92831
Phone: (310) 476-8729
FAX: (714) 870-5972


Copyright Ceiling Designs Inc. 1999-2012
All Rights Reserved